Spyderco Military 2 Knife Brown Canvas Micarta, Satin Cru-Wear by Sal and Eric Glesser (C36MPCW2)
- Military 2 Brown Canvas Micarta, Satin CruWear, the second generation of the iconic Military model, which has been in continuous production for over 25 years. Elite CruWear steel, Micarta composite grips, stronger, intuitive Compression Lock.
290,99 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Military 2 Brown Canvas Micarta, Satin CruWear The second generation of Spyderco's iconic Military model, which has been in continuous production for over 25 years. Elite CruWear steel, stronger Compression Lock, Micarta composite grips, the same aggressive look and excellent usability! A masterpiece of craftsmanship by father and son Sal and Eric Glesser!
One of the most recognizable Spyderco knives, it has gained a following in both the military and civilian markets. Full-size handle makes it easy to use the folder with gloves or for people with large hands. The reinforced, open design makes it easy to clean and adjust the folder. Manufactured at the Spyderco factory in the USA (Golden, Colorado).
CPM Cru-Wear - high-carbon premium air-hardening tool steel with a hardness of 60-65 HRC. Produced by US Crucible Industries according to the CPM process (Crucible Particle Metallurgy) as an improvement on the manufacturer's conventional Cru-Wear and D2 steels. Produced according to the CPM process, it is more resistant to chipping and cracking than most conventionally produced tool steels. It is not stainless steel. For steel to qualify as stainless, it must contain at least 12% chromium. CruWear contains 7.5% chromium but still offers a high level of corrosion resistance. It contains a high 1.1% carbon, 7.5% chromium, 1.6% molybdenum, 2.48% vanadium and 1.15% tungsten balance for key properties: hardness, toughness, edge retention, machinability, wear resistance and ease of sharpening. It is not easy to find a steel that performs so well in so many categories.
Compression-Lock - (similar to Liner-Lock) a blade locking mechanism patented by Spyderco (made in the USA). Extremely durable, it ensures extreme strength and ease of use. Located on the back of the handle, it prevents the knife from being accidentally closed. When releasing the lock, the fingers are not in the way of the folding blade.
Blade - modified Clip Point profile with enlarged 14 mm SpyderHole (Spyderco patent) for quick opening of the knife even when wearing gloves, enlarged thumb ramp with notches (spine jimping) to help control the large blade. Index Finger Choil (notched profile undercut between the handle and the cutting edge) prevents the folder from slipping in the hand when making strong cuts. Plain blade in combination with full flat grind for perfect cutting edge geometry and extreme cutting performance.
Handle - full-sized, profiled, covered with light, non-slip textured grips made of durable, temperature and chemical resistant Micarta composite, screwed to steel liners. The folder is equipped with a screw-on metal clip with 4-way clip positions. The back of the handle has an enlarged hole (lanyard hole) for pulling a leash or safety cord.
Technical data:
Product number: C36MPCW2
Product name: Military 2 Brown Canvas Micarta, Satin CruWear
Overall length: 242.0 mm / 9.51”
Blade length: 102.0 mm / 4.0”
Blade thickness: 3.7 mm / 0.145”
Handle length: 140.0 mm / 5.51”
Handle thickness: n/a
Weight: 124.0 g / 4.4 oz
Blade material: CPM CruWear
Blade hardness: n/a
Blade grinding: Full-Flat
Blade finish: Satin
Handle material: Micarta
Handle finish color: Brown
Backspacer material: Stainless Steel
Backspacer color: Gray
Clip: Right/left, Tip-up/Tip-down
Clip material: Stainless Steel
Pivot mechanism: Washers
Lock: Compression Lock
Opening method: Manual, thumb hole
Additional accessories: None
Designer: Sal Glesser & Eric Glesser
Brand: Spyderco
Manufacturer: Spyderco, U.S.A.
Country of origin: U.S.A.
Development: Sharg® company