Remette RT-Swordfish CP Knife Black Aluminum/Copper Carbon Fiber, Titanium Black 14C28N (ZL103C7)
- Swordfish CP Black Aluminum/Copper Carbon Fiber, Titanium Black. An innovative knife from the Remette Knives manufactory with gravity-extending 14C26N steel blade. Aluminum Handle with innovative slider blade release system.
118,02 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Swordfish Black Aluminum / Copper Carbon Fiber, Titanium Black intuitive opening, folding knife from the Remette Knives manufactory, a display of engineering in design. Gravity, Blade extends from the front due to the force of gravity. Modeled on the design of the Luftwaffe gravity air knife, commonly known as the knife of German paratroopers. Intuitive blade ejection / retraction with one hand (under the influence of gravity) and excellent materials such as CPM S35VN blade steel and aluminum handle, perfectly combined with the unmatched quality of the Remette brand!
14C28N - martensitic chromium stainless steel is the latest development in the range of knife steels produced by Swedish steel mills Sandvik. An optimized chemical composition with a unique combination provides superior quality, excellent edge performance, high hardness and corrosion resistance. By reducing the amount of carbon 0.62% (C) and increasing the chromium content 14.0% (Cr), as well as adding nitrogen 0.11% (N), corrosion resistance has been significantly improved. Considered an improved version of 13C26 steel. Unbeatable in the price/quality category!
Blade - machine ground with Clip Point profile , with one-sided sharpened edge. Finished with Titanium Plating + Manual Wire Drawing Effect method giving a stunning effect. The backbone extends the length of the cutting edge relative to the length of the slender blade converging towards the needle-sharp tip of the knife. The thickness of the blade provides high strength while the high, flat grind gives excellent cutting edge geometry and extreme cutting performance. A very practical option is the possibility to reposition the blade and adjust it for left-handed people . All you have to do is unscrew a few screws and rotate the blade 180 degrees in the guide. Mechanical locking by snapping the two grips on the top and bottom of the wedge.
Handle - made on CNC milling machines from aluminum, with three-dimensional texture. The chamfered edges of the covers eliminate sharp edges, and the perfectly matched Copper Carbon Fiber composite inlay (inlay) adds an exclusive touch and improves grip security. On the right side, an artful slide for advancing/retracting the blade. A single-position titanium (right) deep-carry clip allows the knife to be carried discreetly in a pocket in tip-down position (blade tip down).
Additional accessories - a leather sheath for carrying and storing the knife.
Technical data:
Product number: ZL103C7
Product name: Swordfish Black Aluminum / Copper Carbon Fiber, Titanium Black
Overall length: 198.0 mm / 7.8"
Blade length: 80.0 mm / 3.15"
Blade thickness: 3.0 mm / 0.12"
Handle length: 118.0 mm / 4.65"
Handle thickness: 13.8 mm / 0.54"
Weight: 88.5 g / 3.12 oz
Blade material: Sandvik 14C28N
Blade hardness: 59-61 HRC
Blade grind: Flat
Blade finish: Titanium Plating + Manual Wire Drawing Effect
Handle material: Aluminum with Copper Carbon Fiber inlay
Handle finish color: Black / Copper
Backspacer material: Aluminum
Backspacer color: Black
Clip: Right, Tip-Down
Clip material: Titanium
Pivot mechanism: Slide system
Locking mechanism: Handle Lock
Opening method: Manual, gravity
Additional accessories: Leather sheath
Designer: Remette Knives
Brand: Remette Knives
Manufacturer: Remette Knives
Country of origin: P.R.C.
Developed by: the Sharg® company
