Tekto F3 Charlie Knife Black G10, Blue HW, Black D2
- F3 Charlie Black/Blue G10, Blue HW, Black a large knife designed to stand up to the toughest tasks. Wide D2 tool steel blade, comfortable G10 composite handle. Quick opening with a flipper, or gravity with the lock button.
125,66 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
F3 Charlie Black G10, Blue HW, Black is more than just a knife. It is a tool that was designed with the most demanding users in mind. Made of good materials, it features unmatched durability and is ready for any challenge. Its design is the result of long-term research and testing to create a tool that is optimal in terms of functionality and durability. The blade is made of high-quality D2 tool steel, which is known for its durability and long sharpness retention. The Handle of the knife is made of G10 composite for lightness and durability. The surface texture and notches on the Handle ensure a secure grip even in the toughest conditions. This is not only a tool, but also a symbol of reliability and durability. This is a knife that will survive anything. Whether you are an advanced or casual user, this knife is sure to meet your expectations.
D2 - a high-carbon, high-chromium high-speed tool steel heat -treated to 58-60 HRC. With a high chromium content of 13.0% (Cr), it offers greater corrosion resistance than most high-carbon steels. Combines strength, excellent edge holding and easy sharpening. Features high wear resistance due to high carbide content in the microstructure.
Blade - wide, Drop Point S/E (Single Edge) type, sharpened on one side. Coated with a titanium-based black finish. The generous belly extends the length of the cutting edge in relation to the length of the blade converging towards a needle-sharp tip. The thickness of the blade combined with a high flat grind gives excellent cutting properties combined with high strength. The blade is opened with a quick flipper (index-finger flipper) when opened acting as a gut. We can also open the knife with gravity by releasing the lock button. To maintain full control of the blade, there is an upper jimping, notched thumb rest on the back of the blade. The entire blade is locked with the proven and popular button lock.
Handle - made with excellent precision from G10 composite, a virtually indestructible plastic, insensitive to weather conditions, resistant to chemicals and mechanical damage. The surface texture and jimping on the back and bottom of the handle make the knife non-slip in the hand during use. The so-called open-backed design without the typical backspacer, fastened together with steel spacers for easy cleaning. The simple, robust design gives you the assurance of many years of use. The ergonomic profile and single-position (right/) clip, allow the knife to be carried discreetly in the pocket, in tip-up position (blade tip up). Above the clip is a lanyard hole, a place for a safety or decorative cord.
Case - the knife is packed in a Velcro velcro-fastened nylon soft pouch for safe carrying and storage of the folder.
Technical data:
Product number: F3R_G1BK_D2BK1_A2
Product name: F3 Charlie Black/Blue G10, Blue HW, Black
Overall length: 230.0 mm / 9.0”
Blade length: 97.0 mm / 3.8”
Blade thickness: 3.2 mm / 0.13”
Handle length: 133.0 mm / 5.2”
Handle thickness: 13.0 mm / 0.5”
Weight: 127.0 g / 4.5 oz
Blade material: D2
Blade hardness: 60-62 HRC
Blade grind: Flat
Blade finish: Black Titanium coating
Handle material: G10
Handle finish color: Black
Backspacer material: Stainless Steel (spacer sleeves)
Backspacer color: Blue
Clip: Right, Tip-up
Clip material: Stainless Steel
Pivot mechanism: n.d.
Lock: Button Lock
Opening method: Manual, flipper, push Thumb Button
Additional accessories: Pouch
Designer: Tekto Knives
Brand: Tekto
Manufacturer: Tekto Knives
Country of Origin: USA
Developed by: the Sharg® company